Hempel product catalogue
Filter
Hempel Hempathane HS 5561B (Base 5561P + Hardener 97050), Hempel 11150 = RAL 7035, 20 Ltr.
Description:
HEMPATHANE HS 5561B is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
Recommended use:
As a VOC-compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified as C2 and C3.
Hempadur Avantguard 750 RÖTLICHGRAU 19830 (Basis Avantguard 750 1736U + Hempel's Curing Agent 97043), Hempel 1736G, 10 Ltr.
Hempadur Avantguard 750 RED GRAY 19830 (based on Avantguard 750 1736U + Hempel's Curing Agent 97043), Hempel 1736G, 10 ltr.
Hempel's Thinner 08080, transparent, 20 Ltr.
Description:
HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf.
Recomended use:
08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Hempel Hempathane HS 5561B (Base 5561P + Curing Agent 97050), Hempel 11150 = RAL 7035, 0,75 Ltr.
Description:
HEMPATHANE HS 5561B is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
Recommended use:
As a VOC-compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified as C2 and C3.
Hempathane Topcoat 55210 (Basis 55219 + Härter 95370), Hempel 12170 Grey, 5 Ltr.
HEMPATHANE TOPCOAT 55210 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention.
Hempadur Avantguard 750 GRAU 19840 (base Avantguard 750 1736U + Hempel's Curing Agent 97043), Hempel 1736G, 10 Ltr.
Hempadur Avantguard 750 GRAU 19840 (base Avantguard 750 1736U + Hempel's Curing Agent 97043), Hempel 1736G, 10 Ltr.
Hempadur EM 35740, Hempel 12170, 2,5 Ltr.
Description:_x000D_
HEMPADUR EM 35740 is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back in service. Time to ballast: 8 hours (20°C/68°F)._x000D_
_x000D_
Recommended use:_x000D_
For smaller difficult access areas where climate control and surface preparation is difficult. It is especially recommended for spots and small area onboard maintenance and repair in e.g. water ballast tank. HEMPADUR EM 35740 can be used on moist surfaces, under conditions of 100% relative humidity. It is mainly intended for brush application.
Hempel's Thinner 08230, transparent, 20 Ltr.
Description:
HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf.
Recomended use:
08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Hempadur 4774D Colour 20454 (Hempadur 4774M Base + Hempel's Curing Agent 9874D), 0,9 ltr.
Hempadur 4774D is a self-priming, high-build, epoxy coating that provides both abrasion and corrosion resistance.
Hempathane Topcoat 55610 (Base 55619 + Curing Agent 97050), Hempel 17620 = RAL9002, 5 Ltr.
Hempathane HS 55610 is a glossy polyurethane topcoat, which is cured with aliphatic isocyanate
Hempadur Avantguard 860, 19840 17990 (Basis Avantguard 860 17999 + Hempel's Curing Agent 98384), Hempel 10 Ltr.
Hempadur Avantguard 860, 19840 17990 (Basis Avantguard 860 17999 + Hempel's Curing Agent 98384), Hempel 10 Ltr.
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 0,75 Ltr.
HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties.
Hempel Hempathane HS 55610 (Base 55619 + Curing Agent 97050), Hempel 11150 = RAL 7035, 0,75 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
Hempel's Brush & Roller Agent 99140, Transparent, 5 Ltr.
Hempel's Brush & Roller Agent 99140, Transparent, 5 Ltr.163382
Hempadur Zinc 17360 Gray 19840 (base 17369 + hardener 97040) Hempel, 10 ltr.
Hempadur Zinc 17360 is a two-component epoxy primer with a high zinc content.
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 10 Ltr.
Description:
HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties.
Recommended use:
As long-term primer on steel for epoxy and polyurethane coating systems in severely corrosive environments.
Hempathane Topcoat 55210 (Base 55219 + Curing Agent 95370), Hempel 57200 = RAL 3020, 0,75 Ltr.
Description:
HEMPATHANE TOPCOAT 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention.
Recommended use:
As a finishing coat for protection of stuctural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.
Hempel's Zinc Primer 16490, Hempel 19840 = metallic grey, 4 Ltr.
HEMPEL'S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.
Hempel's Zinc Primer 16490, Hempel 19840 = metallic grey, 0,5 Ltr.
HEMPEL'S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.
Hempathane TL87/RAL 87481, RAL 7035, Coulour 11150 (Light grey), 20 Ltr.
Two-component, acrylic polyurethane topcoat, cured with aliphatic isocyanate.
Hempathane HS 55610 (Base 55619 + curing agent 97050), Hempel 42600 = RAL 6017, 5 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
In this category you will find various products from Hempel in the field of corrosion protection for the maintenance and repair of wind turbines.
If you cannot find the products you are looking for, send us your enquiry and we will do the research for you.
With access to a wide range of products from various manufacturers, we can help you find the right spare part and accessories for your wind turbine.