Sherwin Williams - Corrosion protection

1
2
3
4
5

In stock

Thinner (Sika) C, 10L

Sika Thinner C is a solvent-based mixture for epoxy and polyurethane products and membranes.

In stock

Thinner K C165, 25L

Thinner

In stock

529057 Macropoxy EG Phosph. N (AB)rotbr. Ei 3KG

Macropoxy EG Phosph. N (AB)red-brown 30KG, 503493

High solids epoxy zinc phosphate primer

In stock

Macropoxy EG-1 Plus (AB) DB601ca , 30KG

Epoxy primer and intermediate coat/MIO

In stock

Thinner EG C165 Ka 25L, 482226

Thinner for various 2-pack coatings based on polyurthane or epoxy

In stock

Macropoxy EG Phosph. N (AB) redbrown 15KG, 529001

High solids epoxy zinc phosphate primer

In stock

Zinc Clad ZS zinc grey, C389, 25KG, 17734

1-pack ethyl silicate zinc primer

In stock

Macropoxy® EG Phosphate Rapid WEA (AB) sand yellow 28,5KG

Macropoxy EG Phosphate Rapid (AB)red-brown 28,5 KG

Fast curing, high-solid epoxy zinc phosphate primer

In stock

Thinner EG, 5 Ltr.

Thinner

MACROPOXYPOXICOLOR (Sika Poxicolor) RAL 7011, 14 kg (AB)

MACROPOXYPOXICOLOR (old name Sika Poxicolor) RAL 7011, epoxy resin plastic-based coating material

SikaCor EG-5, NCS S 0540-G, 30 kg

Macropoxy EG1 Plus(AB)(SikaCor EG-1 Plus) DB702ca, 3KG

Versatile, low-solvent, epoxy resin-based corrosion protection coating.

Sika Poxicolor RAL 8000 28kg (AB)

Macropoxy EG1Rapid(AB) DB702ca, 28,5 KG

Versatile, low-solvent, epoxy resin-based corrosion protection coating.

Sika Poxicolor RAL 5015,14 Kg (Komp. A+B)

Sika Poxicolor RAL 5015,14 Kg (Comp. A+B)

MACROPOXYPOXICOLOR (Sika Poxicolor) RAL 7016, 14 kg (AB)

MACROPOXYPOXICOLOR (Sika Poxicolor) RAL 7016, 14 kg (AB)1, epoxy resin plastic-based coating material

MACROPOXYPOXICOLOR (AB) RAL 6019, 28 Kg

2-pack modified epoxy coating for steel and galvanized steel

Sika Poxicolor RAL 7030 28kg (AB)

Macropoxy EG1 (AB) DB701ca. 30KG, 23972

SikaCor® EG-1 is a 2-component, micaceous iron oxide intermediate coating based on epoxy resin.

SikaCor EG-5 RAL 1018, 10kg

2-component, silk gloss top coat based on acrylic polyurethane

SikaCor EG-4 DB704 12.5 kg, 2-component colored topcoat

SikaCor® EG-4 is a 2-component, colored top coat based on acrylic polyurethane with micaceous iron oxide pigmentation.

Zinc Clad R (AB), zinc grey, 15KG

Epoxy zinc dust primer coating

ACROLON EG5 RAL 5014, 10 KG

Acrylic polyurethane topcoat

Sika Poxicolor RAL 6012,14 Kg (Comp. A+B)

1
2
3
4
5

The corrosion protection products from the Sika Permacor and SikaCor series provide durable protection for steel towers indoors and outdoors. SikaCor also offers high-performance hydraulic steel construction products for foundation structures in the offshore sector as well as proven products for the economical corrosion protection of steel and cast iron machine components.

Onshore coating systems
For the corrosion protection of the tower segments and machine parts, the European standard EN ISO 12944 is used as a basis in the corresponding parts. The minimum requirements of the coating system are usually C5-M high according to EN ISO 12944-2 for tower outer surfaces and C4 high for tower inner surfaces and machine parts.

Steel Tower
Machine and attachment parts
Repair and maintenance

Offshore coating systems
High demands are placed on corrosion protection for the construction of plants on the high seas. Difficult accessibility makes a partial renewal on site almost impossible. The coating systems must therefore be designed to withstand the demanding climate over their entire service life, about 20 - 25 years. Norms and standards for offshore corrosion protection are EN ISO 12944-6, ISO 20340 and NORSOK M-501. The minimum requirement for the coating systems is NORSOK M-501, System No. 1 for tower outer surfaces and C5 M-high for tower inner surfaces and machine parts.

Steel tower and machine parts
Foundation structure
Repair and maintenance